Cameo EVOS W7 Manual De Usuario página 13

DMX
Mode: Art-Net (sACN)
W-DMX
Universe:
Art-Net
sACN
IP: 192.168.000.150
OPERATION VIA ART-NET AND DMX
Art-Net+DMX
The operating mode Art-Net+DMX offers the possibility of controlling the LEDs and the head movement separately via Art-Net and DMX.
DMX Address:
Here it is possible to select whether the LEDs are controlled via Art-Net and the head movement is controlled via DMX, or vice versa. Select-
sACN+DMX
ing this mode automatically activates the 87-channel DMX mode.
Kling-Net+DMX
Starting from the main display, press the rotary-push encoder to enter the main menu. Select the Control menu by turning the encoder and
Slave
pressing the encoder. Turn the encoder to select Art-Net+DMX from the menu and confirm again by pressing the encoder. Information on
Scenes
the sub-menu items in the Art-Net+DMX menu and the corresponding setting options can be found in the table below.
Main Menu
Control
Control
DMX
W-DMX
Settings
Art-Net
sACN
Info
Art-Net+DMX
sACN+DMX
Service
Kling-Net+DMX
Slave
Quick-Light
Scenes
Control
Control
Select by turning the encoder, confirm by pressing, change value or status by turning, confirm by pressing. Return with
 DMX DMX
W-DMX
W-DMX
Address Setting the DMX start addresses Main and Pixel
Art-Net
Art-Net
sACN
sACN
Art-Net+DMX
Art-Net+DMX
Signal Selecting the control signal for Pixel Control
sACN+DMX
sACN+DMX
Kling-Net+DMX
Kling-Net+DMX
Slave
Slave
Scenes
Scenes
Pixel Control Main Address with Master Dimmer (Yes) or without Master Dimmer (No)
Control
DMX
RGB or RGBW Pixel Control
W-DMX
Art-Net
sACN
Art-Net+DMX
Network Settings Network settings:
sACN+DMX
IP address: 1. Set block, confirm, Set 2nd block, confirm ...
Subnet mask: 1. Set block, confirm, Set 2nd block, confirm ...
Kling-Net+DMX
Slave
Select universe and universe group
Scenes
DMX settings DMX control via XLR cable (XLR Only) or W-DMX (Wireless Only). If "XLR
Control
First" is selected, W-DMX serves as backup; if "Wireless First" is selected,
control via XLR cable serves as backup.
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
Reset = Terminate the connection to all W-DMX devices and put them on
sACN+DMX
pairing standby.
Kling-Net+DMX
Slave
Scenes
DMX
87CH Mode:
W-DMX
0 Universe:
Art-Net
sACN
IP:
Art-Net+DMX
001 Main Address:
sACN+DMX
Kling-Net+DMX
Pixel Address:
Slave
!
Scenes
DMX
DMX
W-DMX
W-DMX
Art-Net
Art-Net
sACN
sACN
Art-Net+DMX
Art-Net+DMX
sACN+DMX
sACN+DMX
Kling-Net+DMX
Kling-Net+DMX
Slave
Slave
Scenes
Scenes
Art-Net + DMX
DMX DMX
W-DMX
W-DMX
Art-Net
Art-Net
sACN
sACN
Art-Net+DMX
Art-Net+DMX
sACN+DMX
sACN+DMX
Kling-Net+DMX
Kling-Net+DMX
Slave
Slave
Scenes
Scenes
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
Art-Net (sACN)+DMX
0
192.168.000.150
001
001
Control
Control
Control
Control

Main Address
Pixel Address

Art-Net > Pixel
DMX > Pixel

Master Dimmer
Control
Pixel Mode

IP Address
Subnet Mask
Universe
Universe Group

Receive mode
Connect
Mode: Klin
Main Address:
!
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes

.
DMX
W-DMX
Art-Net
001–502
sACN
001–437
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes

Yes
No
DMX

W-DMX
Art-Net
RGB
sACN
RGBW
Art-Net+DMX
sACN+DMX
xxx.xxx.xxx.xxx
Kling-Net+DMX
xxx.xxx.xxx.xxx
Slave
000–254
Scenes
000–127

XLR Only
XLR First
Wireless First
Wireless Only

Reset
13
Co
Co
Co