Description; Scope; Installation - Vimar Eikon 20445.N Manual Del Instalador

1. DESCRIPTION.

Electronic timer-thermostat for ON/OFF ambient temperature con-
trol (heating and air-conditioning), daily/weekly programming, class I
temperature control device (contribution 1%), change-over relay out-
put 6(2) A 230 V~, power supply 120-230 V~ 50/60 Hz - 2 modules .

2. SCOPE.

The chronothermostat is suitable for ambient temperature control by
regulating the supply circuit of the burner or heat pump (heating), or
the supply circuit of the air conditioner (air conditioning), to maintain
ideal temperature conditions seven days a week . Its multiple func-
tions enable the user to choose between the fixed programs stored
in memory, or to create personalised programs .
The roomy display shows the ambient temperature, the day of the
week, the time, the status of the heating or air conditioning system
and the daily temperature profile for the currently active program .
There is a simple and intuitive procedure for programming all the
parameters, assisted by interactive menus (all instructions shown on
the display), using the 4 buttons on the front of the chronothermo-
stat .
16 - ENGLISH

3. INSTALLATION.

The thermostat must be installed in flush or surface mounting boxes
with frames and plates at a height of 1,5 m above floor level, in an
appropriate position for measuring the ambient temperature; do not
position the instrument inside niches, behind doors and curtains,
close to heat sources or in areas influenced by outside weather con-
ditions . In particular, it should not be installed on perimeter walls
or near electrical devices which generate heat (e.g. dimmers or
lamps).
The thermostat is designed for use in dry, dust-free areas with an
ambient temperature between 0 °C and +40 °C .