Description; Radio Transceiver Base Station; Radio Relay Actuator - Vimar RADIOCLIMA 01930 Manual De Instrucciones

1. DESCRIPTION

The Radioclima system accomplishes ambient temperature control
by actuating the regulating circuits of a burner or circulation pump
(heating), or of an air-conditioning system (cooling), through a radiof-
requency communication system.

1.1 Radio transceiver base station.

The 01930 868 MHz radio transceiver base station is used with the
01910... time-programmable thermostat
Powered by two 1.5V AA LR6 batteries (not included) and equipped
with a built-in antenna, it provides the radio link between the time-
programmable thermostat and the regulating circuits of the burner or
circulation pump, by means of the special radio relay actuator.
It also allows for data exchange and reception of commands by the
01941 GSM Telephone Communicator, in conjunction with the 01931
Internal Communication Interface.

1.2 Radio relay actuator

Powered by a 230 V~ 50-60 Hz supply and available in the 01933
single-channel and the 01934 four-channel versions, it enables
radio reception of commands from the 01910.. time-programmable
2 - ENGLISH
thermostat, used in conjunction with the 01930 radio transceiver
base station for managing climate-control equipment (circulation
pumps, burners, solenoid valves, conditioning systems, etc.)
The device front panel (fig. 1.2.1) includes relay-status and power
indicator LEDs, and a programming button for configuring or
excluding the device from the system.
01934 ATTUATORE RF 4 CANALE
SUPPLY: 4 OUTPUTS:
230 V~ 1B
50-60 Hz 6(2) A 250 V~
out 1 out 2 out 3
L N C NO NC C NO NC C NO NC
Green LED - power on
Red LED - relay channel n. 4
ON
Red LED - relay channel n. 3
Red LED - relay channel n. 2
Red LED - relay channel n. 1
P
Programming button
out 4
C NO NC
Fig. 1.2.1