Description; Scope; Installation - Vimar CLIMARADIO 01915 Manual De Instrucciones

1. DESCRIPTION.

Surface-mounted electronic thermostat to control ambient temper-
ature (heating and air-conditioning), exchange relay output 5(2) A
250 V~, powered by two AAA batteries LR03 1 .5 V (not included) .

2. SCOPE.

The thermostat is suitable for ambient temperature control by regu-
lating the supply circuit of the burner or heat pump (heating), or the
supply circuit of the air conditioner (air conditioning) .

3. INSTALLATION.

The thermostat must be mounted on surface at a height of 1,5
m above floor level, in an appropriate position for measuring the
ambient temperature; do not position the instrument inside niches,
behind doors and curtains, close to heat sources or in areas influ-
enced by outside weather conditions .
The base of the device has 2 slots placed 60 mm apart for fastening
directly to the wall with ø 6 mm screws and studs .
Use in dry, non-dusty environments at a temperature between 0
°C and +40 °C .
12 - ENGLISH