Technical Description; Function Description - Dometic GROUP WAECO CoolMatic CS-MP2 Instrucciones De Montaje

_CS-ACT-MP2.book Seite 19 Freitag, 15. Oktober 2010 10:55 10
CoolMatic CS-MP2
5

Technical description

5.1

Function description

The cooler chills products and keeps them cool. A maintenance-free
refrigerant circuit with compressor provides the cooling.
The cooler is designed for continuous operation at ambient temperatures
between –10° and 55 °C and air humidity up to 90 %.
It is can be tilted sideways up to 30°.
Before exposing the cooler to extreme conditions – such as on expeditions –
please contact the manufacturer. All materials used in the cooling device are
compatible for use with foodstuffs.
Battery monitor
The device has a battery monitor that protects your vehicle battery against
excessive discharging when the device is connected to the 12/24 V vehicle
electrics.
If the cooler is operated when the vehicle ignition is switched off, the cooler
switches off automatically as soon as the supply voltage falls below a set
level. The cooler will switch back on once the battery has been recharged to
the restart voltage level.
Caution - risk of damage
When switched off by the battery monitor, the battery will no longer
be fully charged. Avoid starting repeatedly or operating electric
consumers without longer charging phases. Ensure that the battery
is recharged.
The switch-off and switch-on points measured at the connection terminals of
the compressor are listed in the following table.
Cut-off voltage
Restart voltage
Technical description
Voltage
12 V 24 V
11.3 V 24.6 V
12.5 V 26.0 V
19