Reliable BRIO 500CC Manual De Instrucciones página 11

INSTRUCTIONS FOR DRAINING THE BOILER
1. Wait until the boiler completely cools (approximately 3 to 4 hours).
2. Remove the protective cover at the bottom of the cleaner (as shown in the
picture below).
3. Unscrew the drain nut with the drain plug removal tool (29).
4. Drain the boiler, and fasten the drain nut with the drain plug removal tool (29).
5. Put the protective cover back in place, and secure it tightly.
SPECIAL FEATURES OF THE CLEANER
STEAM PRESSURE INDICATOR (D)
When all lights on the pressure indicator of the control panel come on, the steam
pressure has reached the max setting and is ready for use. The light bar will
change during use along with the change in pressure.
LOW WATER LEVEL INDICATOR (C)
When the low water level indicator flashes, the water level in the water tank is low,
please refill the water tank before use.
ATTACHMENTS
FLOOR BRUSH (9)
Applications: 1. Hard floors (open spaces) 2. Carpets (use with bamboo towel) and
more. Use with extension wands to achieve a comfortable length.
How to use:
1. Move the floor brush back and forth
2. For better results, it is recommended to clean the place first with a vacuum
cleaner (while cleaning carpets)
3. It is not recommended to use the cleaner on floors with wax polish or
Engineered wood floors.
TRIANGLE BRUSH (10)
Applications:
1. Hard floors, kitchen tables (limited spaces).
2. Sofas, beds (use with towel) and more.
08