Important Safety Instructions; Grounding Instructions - LG LDS5040ST/00 Manual De Instrucciones

Please read this guide thoroughly before installation.

IMPORTANT SAFETY INSTRUCTIONS

WARNING
When installing and using your dishwasher, follow basic precautions, including the following:
• Disconnect electrical power before you start!
• All electrical wiring and grounding must be done in accordance with nation and local codes.
• If electrical supply is damaged, it must only be replaced by the manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
• This dishwasher must be connected to a hot water supply between 120°F (49°C) and 149°F (65°C). This tempera-
ture range provides the best washing results and shortest cycle time. Temperature should not exceed 149°F
(65°C) to prevent damage to dishes.
• This appliance must be positioned near to an electrical power supply.
• The appliance is to be connected to the water supply using new hoses. Old hoses should not be reused.
• Check the dishwasher for any damage before trying to install it. If you find any damage to the dishwasher,
please contact your dealer or builder immediately.
• To reduce the risk of electric shock, fire, or injury to persons, the installer must ensure that the dishwasher is
completely enclosed at the time of installation.

GROUNDING INSTRUCTIONS

For a permanently connected dishwasher:
This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead
on the appliance.
※ LG Electronics is not responsible for any product failure or damage that is
caused by improper installation.
IMPORTANT SAFETY INSTRUCTIONS 3