Body Posture During Measurement; Taking Your Blood Pressure Reading - Profi Care PC-BMG 3018 Manual De Instrucciones

5. Body Posture during Measurement

Sitting Comfortably Measurement
a. Be seated with your feet flat on the
floor, and don't cross your legs.
Support the back with the backrest
of the chair.
b. Place palm upside in front of you on
a flat surface such as table.
c. The middle of the cuff should be
at the level of the right atrium of
the heart.

6. Taking Your Blood Pressure Reading

a. After applying the cuff and with your body in a comfortable
position, press the "START" button. A beep is heard and
all display characters are shown for self-test. See Fig. 6-1.
Please contact the service centre if a segment is missing.
b. Then the current memory bank (U1 or U2) is flashing. See
Fig. 6-2. Press the "MEM" button to change to the other bank.
See Fig. 6-3. Confirm your selection by pressing the "START"
button. The current bank will also be confirmed automatically
after 5 seconds with no operation.
Fig. 6-1
PC-BMG 3018_IM_new
Fig. 6-2 Fig. 6-3
157
08.07.19