Deleting Measurements From The Memory - Profi Care PC-BMG 3018 Manual De Instrucciones

d. When the average is displayed and you press the "MEM"
button, the most recent result will be displayed. See Fig. 7-7.
Then the blood pressure and the pulse rate will be shown
individually. Possibly the irregular heartbeat symbol may flash.
See Fig. 7-8 & 7-9. Press the "MEM" button again to display
the next result. See Fig. 7-10. In this way, repeatedly pressing
the "MEM" button displays the respective results measured
previously.
Fig. 7-7
e. When displaying the stored results, the monitor will turn off
automatically after 1 minute of no operation. You can also
press the "START" button to turn off the monitor manually.

8. Deleting Measurements from the Memory

When any result (except average reading of the
last three results) is displayed and you keeping
pressing the "MEM" button for three seconds, all
results in the current memory bank will be deleted
after three "beeps". The LCD will show Fig. 8;
pressing the "MEM" or the "START" button will turn
off the monitor.
160
PC-BMG 3018_IM_new
Fig. 7-8 Fig. 7-9 Fig. 7-10
Fig. 8
08.07.19