Profi Care PC-BMG 3018 Manual De Instrucciones página 159

LCD displays the amount of the results in the current bank.
See Fig. 7-1
b. You can also press the "MEM" button in Clock Mode to
display the stored results. The current memory bank will flash
and the amount of results in this bank will be displayed. See
Fig. 7-2 Press the "START" button to change to the other
bank. See Fig. 7-3.
Confirm your selection by pressing the "MEM" button. The
current bank will also be confirmed automatically after 5 sec-
onds with no operation.
Fig. 7-1
c. After selecting the memory bank, the LCD will display the
average value of the last three results in this bank. See Fig.
7- 4 & 7-5. If no results are stored, the LCD will show dashes
as shown in Fig. 7-6.
Fig. 7- 4
PC-BMG 3018_IM_new
Fig. 7-2 Fig. 7-3
Fig. 7-5 Fig. 7-6
159
08.07.19