x x x x Using the joystick
1
Display the main MENU and select the menu you
want to adjust.
Press the joystick once to display the main MENU. Then
move the joystick up, down, left, or right to highlight the
desired menu. Press the joystick to select the menu item.
b
2
Adjust the menu.
Move the joystick up, down, left, or right to make the
adjustment.
3
Close the menu.
Press the joystick once to return to the main menu, and twice
to return to normal viewing. If no buttons are pressed, the
menu closes automatically after about 30 seconds.
x x x x Resetting the adjustments
Press the RESET button. See page 16 for more information on
resetting the adjustments.
RESET
Adjusting the brightness and
contrast
Brightness and contrast adjustments are made using a separate
BRIGHTNESS/CONTRAST menu.
These settings are stored in memory for the signals from the
currently selected input connector.
1
b
2
If you are using the sRGB mode
If you selected the sRGB mode in the COLOR menu, the
following BRIGHTNESS/CONTRAST menu appears on the
screen.
For more information about using the sRGB mode, see
"Adjusting the color of the picture (COLOR)" on page 13.
The menu automatically disappears after about 3 seconds.
Adjusting the size of the picture
(SIZE)
This setting is stored in memory for the current input signal.
1
2
3
Move the joystick in any direction.
The BRIGHTNESS/CONTRAST menu appears on the
screen.
BR I GHTNESS / CONTRAS T
2 6
Move the joystick up or down to adjust the
brightness (
), and left or right to adjust the
contrast (6).
BR I GHTNESS / CONTRAS T
5 6
s RGB :
5 6
Press the joystick.
The main MENU appears on the screen.
Move the joystick to highlight
joystick again.
The SIZE/CENTER menu appears on the screen.
First move the joystick up or down to select
horizontal adjustment, or
adjustment. Then move the joystick left or right to
adjust the size.
2 6
US
7 6
7 6
SIZE and press the
for
for vertical
11