Adjusting The Brightness And Contrast (Contrast/Bright); Adjusting The Centering Of The Picture (Size/Center); Adjusting The Size Of The Picture (Size/Center) - Sony CPD-G520 Manual De Instrucciones

Adjusting the brightness and
contrast (CONTRAST/BRIGHT)
These settings are stored in memory for the signals from the
currently selected input connector.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
Then press the control button.
The CONTRAST/BRIGHT menu appears on the screen.
Move the control button up or down to highlight 6
3
or . Then press the control button.
4
Move the control button up or down to adjust the
contrast (6) or brightness (
control button.
If you are using the sRGB mode
If you selected the sRGB mode in the COLOR MODE (
OPTION ( ) menu, the following CONTRAST/BRIGHT menu
appears on the screen.
CONTRAST
You cannot adjust the contrast (6) or brightness (
screen. If you want to adjust them, select a mode other than sRGB
in the COLOR MODE ( ) of the OPTION (
For more information about using the sRGB mode, see
"Adjusting the color of the picture (COLOR)" on page 15.
12
). Then press the
) of the
/ BR GHT I
s RGB
: /
EX I T :
MENU
) on this
) menu.
Adjusting the centering of the
picture (SIZE/CENTER)
This setting is stored in memory for the current input signal.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
. SIZE/CENTER and press the control button.
The SIZE/CENTER menu appears on the screen.
3
Move the control button up or down to select
horizontal adjustment, or
Then press the control button.
4
Move the control button up or down to adjust the
centering.
Adjusting the size of the picture
(SIZE/CENTER)
This setting is stored in memory for the current input signal.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
SIZE/CENTER and press the control button.
The SIZE/CENTER menu appears on the screen.
3
Move the control button up or down to select
horizontal adjustment, or
adjustment. Then press the control button.
4
Move the control button up or down to adjust the
size.
for
for vertical adjustment.
for
for vertical