Installation Of Energy Meter (Fig. I) - Diehl Sharky 775 Instrucciones De Montaje

Deutsch
English
The Software IZAR@Mobile2 is used for reading out data and configura-
tion and can be downloaded from the Internet under:
http://www.diehl.com/en/diehl-metering/products-solutions/product-
download/
Please select the partner "Diehl Metering GmbH" and the product area
"Metering systems".
2. Transport and storage
Unpacking
Energy meters are measuring devices and must be handled with care.
To protect against damage and soiling, they should only be unpacked
immediately prior to installation.
Transport
The transport of the meter is permitted only in the original package.
When sending wireless measuring instruments / components by
air, disable the wireless (place in aircraft mode) before shipping.
3.

Installation of energy meter (fig. I)

ƒ
Depending on the design and application (heat or cooling meter), the
energy meter is installed in either the hot or cold line of the system.
ƒ
The flow sensor must be installed so that the flow direction matches
the arrow direction on the sensor.
ƒ
Depending on the version, the flow sensor must be installed in flow or
return. The installation position is displayed in the info loop 3.5 (see
"Information loop (3)" page 37) and, if necessary, also by means
of a pictogram.
Flow Return
No pictogram
(Installation position
can be set on site,
see 6.1 page 28)
-23-