Display Error Codes - Diehl Sharky 775 Instrucciones De Montaje

Pulse loop (4)
Sequence Window 1
Pulse input 1
4.1
Pulse input 2
4.2
Pulse output 1
4.3
Pulse output 2
4.4
Tariff loop (5)
Month loop (6)
Sequence Window 1
6.1 "LOG"
6.2 "LOG"
: :
6.24 "LOG"
* Example 1Only for heat meters with activated cooling tariff
9. Operation
Use the push button to page through the individual displays. When doing
so a differentiation is made between short and long button presses. With a
short button press (<3 seconds) you get to the next display within a loop;
with a long button press (>3 seconds) you get to the next display loop.
The "Energy" window (sequence 1.1) of the main loop is the basic display.
If the button is not pressed for approx.4 minutes, the meter automatically
switches off the display to save power (exception: an error exists). If you
press the button again, the meter returns to the basic display.
10.

Display Error codes

If an error occurs, the error code is displayed in the main loop. All win-
dows, however, can still be accessed by pressing the button. If the button
is not pressed for approx. 4 min, the error code is automatically displayed
again.
The error message disappears automatically as soon as the source of the
error is corrected. All errors that exist for longer than 6 min, are saved in
the error memory.
-38-
Deutsch
Window 2
Cumulative value pulse
input 1
Cumulative value pulse
input 2
Pulse weighting pulse output 1
Pulse weighting pulse output 2
1
Window 2
Date-1
Date-2
:
Date-24
English
Window 3
Pulse weight
Pulse weight
Window 3 Window 4
Energy Max. flow
Energy Max. flow
: :
Energy Max. flow