16.3 Fuel loading
During operation, to refill with fuel it is necessary to follow this procedure:
• Slowly open the fire door in order to avoid creating an air depression in the fire box, which would cause an almost certain
release of smoke into the room (depending on the flue draw).
• Refill the fire box with fuel and then close the fire door.
Avoid overheating the stove by loading an excessive amount of fuel.
Introduce fuel when the embers have formed and the flame has lowered.
The stove is equipped with a bypass valve, which, when opened, facilitates the escape of smoke into the flue minimising
puffs of smoke into the environment.
17
Cleaning the fireplace
The fouling inside the flue affect the optimum draft. When they reach a thickness of 5-6 mm with high temperatures and
sparks can ignite with easily imaginable consequences both for the flue and for the house.
It is therefore recommended to carry out the cleaning at least once a year or every 4 tonnes of firewood burned (as specified
in the product standard), using specialized personnel
17.1 Disassembling the deflectors and O
• Open the door.
• Remove in sequence the deflectors and O
28
RING (in the configurations in which it is provided)
2
RING as shown in the diagram (Fig. 6.1 - Fig. 6.1a - Fig. 6.1b - Fig. 6.1c).
2
Product images are purely indicative
cod. 004777530 MBL - 21/03/2019 - Palazzetti - PN - Italy