Palazzetti ECOMONOBLOCCO WT F Serie Manual De Uso página 34

It is also possible to connect the control panel directly to the router (always using the APP, refer to the relevant manual); in
this case the control panel will work in Station Mode (Sta Mode).
Attention: in case of change of the router password, you will need to reset the control panel according to the following procedure:
- Access the screen Info on the control panel display and navigate on the screen
connbox00xx
xxx.xxx.xx.x
signal xxdBm
proto DHCP
- Press and hold the button on the control panel for 4 sec.
The control panel will then start the restart process moving back to access-point mode.
You will now be able to log back in to the router using the App (refer to the manual attached).
34 cod. 004777530 MBL - 21/03/2019 - Palazzetti - PN - Italy