Chicco London Instrucciones De Uso página 18

Wash by hand in cold water
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Periodically wipe clean plastic parts with a soft damp cloth.
Always dry the metal parts to prevent the formation of rust if
the stroller has come into contact with water.
Certain models include a seat pad which should be cleaned
following the instructions on its care label
MAINTENANCE
Lubricate the moving parts only if necessary, with the light
application of a silicone based lubricant. Regularly check the
condition of the wheels and, keep them clean of dust and sand.
To avoid friction that may prevent the correct operation of the
stroller, ensure that all the movable plastic parts placed
along the metal frame are clean of dust, dirt or sand. Keep the
stroller in a dry place.
LIST OF COMPONENTS
Check that you have all the parts required for this model
before assembling the product. If any parts are missing,
please contact the Chicco Customer Care Service. No tools
are needed to assemble the product. The following parts are
needed to assemble the product:
1 stroller
1 hood
2 front wheels
1 rain cover
1 carry-all basket
1 sleep sack (79251.930)
1 shoulder carry strap (79253)
1 seat pad (79253)
HOW TO ASSEMBLE THE FRONT WHEELS
1. Fit the front wheel unit to the stroller and lock it into position
(see diag. 1). A "click" will be heard indicating that the front
wheel unit is fitted correctly into position. Repeat this opera-
tion with the other wheel unit.
WARNING: Before use, ensure that the wheel units are safely
locked into position.
OPENING INSTRUCTIONS
WARNING: When opening the stroller, ensure that your child,
or other children, are at a safe distance. Ensure that during these
operations, the movable parts of the stroller do not come into
contact with your child.
2. Remove the stroller from the package. Then hold the stroller
in a vertical position, with the wheels facing forward (Diag. 2).
3. Release the closing device and push the front part of the
stroller forward (Diag. 3).
4. Use your foot to press the rear crossbar downwards and check
that the stroller is now completely open (Diag. 4).
SAFETY HARNESS
5. The stroller has a five-point safety harness that features
two shoulder straps, a waist strap and a crotch strap, with
a safety buckle, which prevents the accidental opening by
the child.
WARNING: Always fasten the safety harness. After fas- tening
the buckles, adjust the length of the safety harness as required
to ensure a secure fit. Always use the safety harness together
with the crotch strap.
WARNING: when carrying children from 0 to 6 months of age,
the shoulder straps must be threaded through the two adjuster
slots before being fastened (diag. 5B).
WARNING: the safety harness must always be fastened to
guarantee complete safety for your child. For extra safety, the
stroller is fitted with D rings, which can be used to fit a separate
safety harness, compliant with BS 6684 Standards. The rings
are fitted on the right and left side of the stroller seat, as seen
in points A and B.
London Deluxe 79253: Diag. 5C-5D. Bring the upper harness
strap clasp (A) in line with the triangle on the lap belt clasp (B)
and then insert them both in the harness buckle (C). Press the
centre button (D) to release the safety harness straps.
RECLINING THE BACKREST
6. The backrest can be reclined to 5 different positions (diag.6).
7. Press the button on the stroller backrest and adjust the
height as required; now release the button and the backrest
will lock in the nearest position(diag. 7).
8. Simply push the backrest upwards to raise it to the desired
height (diag. 8).
WARNING: Check that the backrest is locked correctly into
position. The child's weight can make these opera- tions
difficult. When adjusting the backrest, ensure that movable
parts of the stroller do not come into contact with the child.
ADJUSTING THE LEG REST
9. The stroller leg rest can be adjusted to 2 different positions
to ensure maximum comfort for your child. Press both side
adjustment buttons at the same time to adjust the position
of the leg rest as required (diag. 9).
BRAKES
The rear wheels have linked brakes, which can be applied
simultaneously to the two dual rear wheels by using only one
pedal.
10. To apply the brakes, push the lever located at the centre of
the rear wheels in a downward direction (diag. 10).
11. To unlock the braking system, push one of the two levers
located at the centre of the rear wheels in an upward
direction (diag. 11).
WARNING: Always apply the brakes whenever the stroller is
stationary. Never leave the stroller on a sloped surface, with a
child onboard, even with the brakes applied. WARNING: After
operating the brake's lever, ensure that the brakes are correctly
applied on all the rear wheels.
FRONT SWIVEL WHEELS
12. Use the swivel wheels on smooth surfaces. To unlock the
wheels, push the lever located between the wheels in a
downward direction (diag. 12).
13. Pull the lever in an upward direction to lock the wheels
18