Num'axes PIE1035 Manual De Instrucciones página 16

Estimated available space
Mode (Video)
-
Press the DOWN button to enter the setting menu.
-
Use the UP and DOWN buttons to navigate the operating parameters.
-
Press OK to enter the parameter you wish to set.
-
Use the UP and DOWN buttons to navigate the available settings for the chosen parameter.
-
Press OK to confirm the setting and exit.
The default settings are in bold characters in the following paragraphs.
8.1. Mode
PHOTO mode: the camera shoots photos only.
VIDEO mode: the camera shoots videos only.
PHOTO & VIDEO mode: a still photo/still photos and a video clip are both captured for each trigger.
TIMELAPSE mode: the camera takes photos automatically at your choice of interval during one block of time you set
up. The camera automatically merge the photos taken into a video file.
For the TIMELAPSE mode to operate, it is imperative to set the "Timelapse Interval" and "Timelapse Period"
parameters. You also have to set the time.
8.2. PIR Delay Time
This parameter allows you to set how long the PIR sensor will be disabled after each triggering. During this time, the
PIR sensor will not react to motion. This option prevents the camera from taking to many photos or videos.
Example: If PIR delay time is set on 1 minute, the camera will wait 1 minute between photo/video recordings even if
a motion is detected.
8.3. PIR Sensitivity
High sensitivity 1) is more sensitive to movements by smaller subjects; 2) offers longer detection distance; 3) makes it
easier for the PIR sensor to detect difference between body heat and outdoor temperature; 4) makes it easier to
trigger camera to record.
PIE1035 - Indice A – Novembre 2018
Mode (Photo)
(number of photos)
PHOTO | VIDEO | PHOTO & VIDEO | TIMELAPSE
2 seconds | 5 seconds | 10 seconds | 15 seconds | 30 seconds | 1 minute | 3 minutes |
5 minutes | 10 minutes | 15 minutes | 30 minutes
High | Middle | Low
Battery level indicator
Date
(month.day.year)
Date
Battery level indicator
(month.day.year)
Time
Time
16/44