Cleaner does
There is air in the
not sink
cleaner
Drive roller
Foreign body in the
breaks off
drive
Cleaner climbs too
Cleaner
high, air in the cleaner
comes up
Cleaner is
faulty
Important information
Technical data
■ Input voltage: 220(230) VAC
■ Frequency: 50 Hz
■ Output voltage: DC (direct current) 20 V
■ Rated capacity: 200 W
■ Cable length: 18 m
■ Width of cleaning drum: 465 mm
■ Filter performance: 20 m³/h
■ Filter grade: 100 μm
■ Operating temperature (water): 10°C - 32°C
■ Crawl speed: 12m/min
■ Hydrolytic resistance class: Cleaner: IPX8; Electricity control box:
IPX5
■ Ambient temperature: 10.0°-40.0°C
■ Weight of the cleaner: 9.5 kg (without cable)
Service
Please do not send the device to us without authorisation! You should
fi rst get in touch with our service centre. If your claim is not covered by
the warranty/guarantee, any costs incurred will be charged. Guaran-
tee processing / guarantees are handled by the company Steinbach
VertriebsgmbH. The company Steinbach VertriebsgmbH handles all
services (repairs, dispatch of spare parts) for your product. A return is
not possible. Please contact your retailer where you bought the product.
Cleaning
Use conventional cleaning products for cleaning and not solvent-cont-
aining and abrasive detergents or hard sponges, brushes etc. The cle-
aning robot is, in principle, also suitable for pools with salt electrolysis,
provided the salt content does NOT exceed 0.5%. It is important to note
that the robot must be rinsed with fresh water on the inside and outside
after every cleaning operation in order to avoid damage to the device!
Storage
The product must be thoroughly dried after cleaning. When the pool
cleaner is not being used, store it in a well ventilated place out of direct
sunlight. Avoid direct sunlight. Make sure the room temperature is
above 5°C in winter.
Disposal
Disposing of packaging: The packaging material has been selected
in view of environmental concerns and disposability and is therefore
recyclable. The paper and cardboard can be recycled, as can the plastic
coverings.
Disposing of the product: Applicable in the European Union
and other European states with systems in place for collec-
ting and sorting recyclable materials. Dispose of the product
in accordance with any laws and regulations applicable at
your place of residence.
Old devices must not be placed in the household waste! Should the
robot become unusable, each customer is legally obligated to separa-
Switch the unit off, allow the
te old devices from the household waste, e.g. take the device to your
air to escape, and let the
community/area collection point. It is therefore ensured that old devices
cleaner sink to the bottom.
are professionally recycled and negative effects on the environments
Contact the customer ser-
are mitigated. For this reason, electrical devices are marked with the
vice centre
symbol depicted here.
Switch the unit off
allow the air to
Declaration of conformity (CE)
escape.
Contact the customer ser-
The EU declaration of conformity can be requested via the address
vice centre
shown at the end of this manual.
Warranty conditions
The respective country's legal provisions for warranty conditions shall
apply accordingly.
061025_2003
EN
9