Publicidad
14. Assemble t heaxlebracket t otheoutsideoftheangle
brackets usingtwo5/16"x 1"hexbolts(D)and5/16"
nylock nuts(G).The endsoftheaxlebracket m ust p oint
asshown infigure 8.Tightenandthenloosen thenuts
1/4turn.
15. Tightenthe nutsfastening the anglebrackets to the
tray.
HITCH ARMS
/
(G) 5116"
NYLOCK NUT
(D) 5/16" x 1"
HEX BOLT
HITCH ARM
MOUNT BRACKET
(G) 5/1 6"
(E) 5/1 6" x 1"
NYLOCK NUT
CARRIAGE BOLT
FIGURE 10
REAR ViEW
18. Turn the tray so that the front faces you. Assemble two
angle brackets (O) to the holes in the bottom of the tray
using two 5/16" x 1" hex bolts (D) and 5/16" nylock nuts
(G). Do not tighten yet. See figure 11.
FIGURE 8
REAR ViEW
16. Assemble the wheels to the axle bracket using a shoulder
bolt (A) and a 3/8" nylock nut (F) for each wheel. Tighten.
See figure 9.
J
(A) SHOULDER BOLT
(F) 3/8"
NYLOCK NUT
FIGURE 9
REAR VIEW
17. Assemble the hitch arms to the outside of the hitch
arm mount brackets. Use two 5/16" x 1" carriage bolts
(E) and 5/16" nylock nuts (G). Do not tighten yet. See
figure 10.
(G) 5116"
NYLOCK NUT
ANGLE
(D) 5/16" x 1"
HEX BOLT
FIGURE 11
FRONT VIEW
19. Fasten the hitch mount arms to the outside of the angle
brackets at the front of the tray using two 5/16" x 1" hex
bolts (D) and 5/16" nylock nuts (G). Tighten and then
loosen the nuts 1/4 turn. See figure 12.
7
(G) 5/16"
(D) 5/16" x 1"
NYLOCK NUT
HEX BOLT
FIGURE 12
FRONT VIEW
Publicidad
