Bosch GDB 2200 WE Instrucciones De Servicio página 9

Product Specifications
Diamond Drilling Machine
Order number
Rated power
consumption
Power output
Rated speed
1st Gear
2nd Gear
Drill diameter
1st Gear
2nd Gear
Tool holder
Weight approx.
Protection class
Please observe the order number of your machine.
The trade names of the individual machines may vary.
Product Elements
The numbering of the product elements refers to the
illustration on the fold-out page.
1 Diamond Drill Stand S 500 A*
2 Tap connection piece
3 FI protection switch
4 Gear selector
5 Feed handle
6 Transport wheels
7 Support bracket
8 Ring screws of the water collection ring*
9 Holding device for the water collection ring*
10 Clamping lever of the water collection ring*
11 Water collection ring*
12 Extraction connection piece of the water collection
ring*
13 Sealing cover of the water collection ring*
14 Core drill bit*
15 Copper ring*
16 Drill spindle
17 Water flow indicator
18 Shut-off valve
19 Control lamp
20 On-Off switch
* Optional accessories
Not all the accessories illustrated or described are in-
cluded in standard delivery.
1 609 929 C90 • (02.07) T
GDB 2200 WE
0 601 18A 7..
[W] 2200
[W] 1260
[RPM] 410
[RPM] 900
[mm] 82...212
[mm] 32...132
1 1/4" UNC, R 1/2"
[kg] 11.6
/ I
Noise/Vibration Information
Measured values determined according to EN 61 029.
The A-weighted noise levels of the tool are typically:
Sound pressure level: 89 dB(A)
Sound power level: 102 dB(A)
Wear ear protection!
The typical hand-arm vibration is below 2.5 m/s
Intended Use
The machine in conjunction with wet diamond core
bits and a water supply is intended for wet drilling in
mineral building materials such as concrete, steel-rein-
forced concrete and masonry. It is not suitable for
overhead drilling. The machine may be used only in
conjunction with the S 500 A diamond drill stand. The
combination with an extraction device (water collec-
tion ring and a Bosch all-purpose vacuum cleaner) is
possible.
English–1
For Your Safety
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed.
In addition, the general safety
notes in the enclosed booklet must
be observed.
Before using for the first time, ask
for a practical demonstration.
The safety and working instruc-
tions for the drill stand used are to
be strictly observed!
Wear ear protection to prevent damage
to your hearing.
Wear safety glasses and sturdy shoes.
For long hair, wear hair protection.
Work only with close-fitting clothes.
Drill only with a FI protection
switch.
Before beginning work, check the
proper functioning of the FI protection
switch 3 .
Have a damaged FI protection switch
or cable professionally repaired or re-
placed at a Bosch-customer service lo-
cation.
2
.