Charging Your Battery - Qstarz BT-Q1000X Guía De Instalación Rápida

Beyond Navigation
...................................................................................................................................................
bottom side of the unit and pull out the battery cover.
Insert battery in the unit and put battery cover on to the
cabinet, then push down and force it forward to fit firmly.
D-2 Take Battery out: Press the PUSH button on the
bottom side of the unit and pull out the battery cover.
Then take out the battery from the unit.
E. Charging your battery
For the first time using the BT-Q1000XT, please charge
battery until it is fully charged. Take the power cable and
connect it to the power jack (mini USB type) and recharge
through USB cable, travel charger or car cigarette adaptor.
This will begin to charge the battery. Charging time is 3
hours typically.
- When the Power LED is Red, battery
power is low status. Please recharge.
- When the Power LED is Green, the
battery is under charging mode.
- When the Power LED is off, the
battery is fully charged.
F. Setup BT-Q1000XT
F-1 Install the USB Driver and software utility (Only
support Microsoft Windows XP / Vista/Win7)
Please insert the Driver CD to your computer, and find the
folder "Utility\QTravel\". Double click
"QTravelV1_installer.exe" to install the software utility
package. This software package contains USB driver and
QTravel™ software inside.
F-2 Install Google Earth
BT-Q1000XT supports to show your travel path directly on
Google Earth. Please go to
...................................................................................................................................................
.............................................................
www.Qstarz .com
.............................................................
http://earth.google.com
English
for
3