Qstarz BT-Q1000X Guía De Instalación Rápida página 6

English
...................................................................................................................................................
.............................................................
4.5 Vibration Detector
Vibration Detector is functioned for power saving
and waypoint saving. It will detect the physical
movement of the device. When it detects the
device not moving more than 10 minutes,
Q1000XT will enter sleep mode so that the Blue
LED will turn to flash every 5 seconds. Under sleep
mode the log will be disabled.
Note 1: Vibration Sensor function is turned off as
default, and can be turned on by provided
software -> config GPS.
Note 2: Once the device enters sleep mode and
it may auto wake-up when detecting "significant"
movement. We strongly suggest you to use SHAKE
method as first priority to wake-up device in case
some tracks might not be recorded.
4.6 Speed Alarm
You can set the speed (0~999km/h) and
continues for (1~9999 secs) to enabled the speed
alarm sound when speed is exceeded.
Note: The speed alarm will not be functioned if
the buzzer function is disabled.
4.7 Time Schedule
Allow you to schedule Q1000XT to start or stop log
automatically at a specific date/time or periodic
date/time.
Note:The time schedule function would only works
in Nav mode.
5. <File> \ <Download AGPS Data>
Update the AGPS data from internet assistance server to
................................................................................................................................................................................
.........
6
Recorder will stop logging.
www.Qstarz.com