Setting The Speaker Output Timing-Time Alignment - JVC KD-A925BT Manual De Instrucciones

3 If "Default Music" is selected in 2...
Sound
0
Step 1
1 Press 4
/¢
the target instrumental sound
for adjustment (by referring to a
reference sound, eg. Drum).
Step 1: Plays all instrument sound.
Step 2: Plays low frequency sound
(eg. Bass).
Step 3: Plays middle frequency sound
(eg. Piano).
Step 4: Plays middle-high frequency
sound (eg. Brass).
Step 5: Plays high frequency sound
(eg. Cymbal).
2 Turn the control dial to adjust the
level [ –9 to +9 ].
3 Press the control dial to confirm the
adjustment.
Select and Store
Sound1
Sound2
Sound3
4 Turn the control dial to select a preset
sound mode [ SOUND 1/ 2/ 3 ]. Then
press the control dial to store.
The unit returns to playback
screen and the selected sound
mode [ SOUND 1/ 2/ 3 ] is selected
automatically.
Setting the speaker output timing—Time Alignment
1
[Hold]
to select
2
• If "0" is selected for all steps (1 — 5),
"FLAT" is selected.
• To store another sound mode, repeat
1 to 3.
If "Optional Music" is selected in 2...
] Selects an item from the list. (This list
shows only <.jms> files in the root folder
of the USB device.)
• Visit the following JVC web site:
<http://www.jvc.co.jp/english/car/
index.html> (English website only) to:
– Check the downloading method.
– Download <.jms> files.
• "No External File" appears if there is no
<.jms> file in the root folder or if no USB
device attached.
• Store <.jms> files in only one of the
USB devices if two USB devices are
connected at the same time.
• "Error" appears if the file is unreadable.
] <EQ/DSP> ] <Time Alignment>
T.Align
CarType
User
Seat
ALL
Continued...
ENGLISH 27