Setting The Time For Dimmer - JVC KD-BT1 Manual De Instrucciones

Category Indication
Ext Input *
8
External input
Beep
Key-touch tone
Amp Gain
Amplifier gain
control
Color Sel
Color selection
Color Set
Color setting
Red
Green
Blue
*
8 Displayed only when one of the following sources is selected—TUNER, SIRIUS, XM, CD, USB, Bluetooth Phone, or
Bluetooth Audio.
*
9 Depends on the "Dimmer" setting.

Setting the time for dimmer

• When appears on the display, you can move
back to the previous display by pressing number
button 3.
1
Follow steps 1 to 3 on page 31.
• In step 2, select "DISPLAY."
• In step 3, select "Dimmer."
2
Select "Time Set."
34
All manuals and user guides at all-guides.com
Item Setting, [reference page]
( : Initial)
• Changer : To use a JVC CD changer, [21], or an Apple iPod/a JVC
D. player, [26].
• Ext In : To use any other external component, [28].
• On : Activates the key-touch tone.
• Off : Deactivates the key-touch tone.
• High PWR : Volume 00 – Volume 50
• Low PWR : Volume 00 – Volume 30 (Select if the maximum power of
each speaker is less than 50 W to prevent damaging the
speaker.)
Initial: All : Select your favorite display color for each source (or for all
Source sources), [35].
— : Create your own colors, and select them for the display
color, [35].
Day Color : User color during the day time *
: User color during the night time *
NightColor
00 – 11 : Initial: Day Color: +07, NightColor: +05
00 – 11 : Initial: Day Color: +07, NightColor: +05
00 – 11 : Initial: Day Color: +07, NightColor: +05
9
3
Adjust the dimmer time.
1
Turn the control dial to set the dimmer time.
¢
2
Press to select "To." Then, turn the
control dial to set the dimmer end time.
4
Exit from the setting.
.
9 .