Unpacking And Assembly; What's In The Box - Oregon BL300 Manual Original De Instrucciones

UNPACKING AND ASSEMBLY

UNPACKING AND ASSEMBLY
UNPACKING

WHAT'S IN THE BOX?

The blower requires some assembly
before use . These items ship with the
blower:
• Blower
• Nozzle
• Harness
• Charger and power cord (if so equipped)
• Battery (if so equipped)
After removing the blower from the
box, inspect it carefully to ensure no
damage has occurred during shipping
and that no parts are missing . If any parts
are damaged or missing, do not use
the blower . Contact OREGON® Cordless
Tool System at 888 . 3 13 . 8 665 to obtain
replacement parts .
12
OREGON® Cordless Tool System
BLOWER MODEL BL300
ASSEMBLY
WARNING: ONLY OPERATE
THE BLOWER WITH THE NOZZLE
PROPERLY ASSEMBLED.
WARNING: A BATTERY OPERATED
TOOL WITH THE BATTERY PACK
INSERTED CAN START ACCIDENTALLY.
REMOVE THE BATTERY PACK BEFORE
ASSEMBLING OR PERFORMING
MAINTENANCE.
Before using the blower, connect the
nozzle to the blower tube .
• Orient the nozzle so that the two lugs (1)
on the blower tube align to the two
slots (2) on the nozzle (Fig . 3) .
FIG. 3
(1)
• Press the nozzle onto the blower tube (1),
then rotate one quarter turn (2) to lock
into place (Fig . 4) .
FIG. 4
(2)
(2) (1)
AA 1214 - F/N 571702