General Operation; Operating Temperature; Using The Harness - Oregon BL300 Manual Original De Instrucciones

OREGON® Cordless Tool System
BLOWER MODEL BL300

GENERAL OPERATION

WARNING: TO REDUCE THE RISK
OF INJURY, ALWAYS WEAR PROPER
BOOTS, LONG PANTS, EAR AND EYE
PROTECTION.
WARNING: TO REDUCE THE RISK OF
INJURY, DO NOT POINT THE BLOWER
AT THE OPERATOR, BYSTANDERS OR
PETS.
WARNING: TO REDUCE THE RISK
OF INJURY, DO NOT OVERREACH
AND DO NOT STAND ON A LADDER,
STEPSTOOL OR ANY RAISED
POSITION THAT IS NOT FULLY
SECURED.

OPERATING TEMPERATURE

This blower is designed to operate within
a temperature range of 32°F to 104°F (0°C
to 40°C) .
GRIP
The blower can be used with either hand .
Grasp the handle with the whole hand
and firmly wrap the fingers and thumb
around the handle (Fig . 11) .
FIG. 11
GRIP WITH WHOLE HAND
AA 1214 - F/N 571702
OPERATING THE BLOWER
FOOTING
Stand with both feet on solid ground
with weight evenly spread between them
(Fig . 12) .
FIG. 12
Be careful on stairs, and work slowly
to maintain footing . Never run when
operating the blower .

USING THE HARNESS

The harness helps to distribute the
weight of the blower across the body,
increasing comfort for extended use .
This harness is equipped with a quick-
release that can be operated with one
hand (Fig . 13) .
FIG. 13
15