Maintenance; Generalrecommendations; Pressure Washer Maintenance - Troy-Bilt 020344-2 Manual Del Operario

Maintenance
Pressure Washer Maintenance
GeneralRecommendations
Regular maintenancewill improve the performance and
extend the life of the pressure washer. See any qualified
dealer for service.
The pressure washer's warranty does not cover items that
have been subjected to operator abuse or negligence. To
receive full value from the warranty, the operator must
maintain the pressure washer as instructed in this manual,
including proper storage as detailed in Winter Storage and
Long Term Storage.
NOTE:Should you have questions about replacing
components on your pressure washer, pleasecall
(888) 611-6708 for assistance.
• Some adjustments will need to be made periodically to
properly maintain your pressure washer. Checkthe
spray gun and nozzle extension assembly for wear.
• All maintenance in this manual and the engine
operator's manual should be made at least once each
season.
• Once a year you should clean or replacethe spark plug,
clean or replacethe air filter. A new spark plug and
clean air filter assure proper fuel-air mixture and help
your engine run better and last longer. Please refer to
your engine operator's manual for more details.
Before EachUse
1. Check engine oil level.
2. Clean
3. Check
4. Check
5. Check
6. Check
leaks.
7. Rinse
debris.
water inlet screen for damage.
high pressure hose for leaks.
detergent siphoning tube and tank for damage.
spray gun and nozzle extension assembly for
out garden hose to flush out debris.
Pump Oil
DO NOT attempt any oil maintenance on this pump. The
pump is pre-lubricated and sealedfrom the factory, requiring
no additional maintenancefor the life of the pump.
Clean Debris
Daily or before use, clean accumulated debris from cleaning
system. Keep linkage, spring and controls clean. Keep area
around and behind muffler free from any combustible debris.
Inspect cooling air slots and openings on the pressure
washer. These openings must be kept clean and
unobstructed.
Cleaningsystem parts should be kept cleanto reducethe risk of
overheatingand ignition of accumulateddebris.
• Use a damp cloth to wipe exterior surfaces clean.
NOTICE Improper treatment of pressure washer can
damage it and shorten its life.
• DONOTinsert anyobjectsthroughcoolingslots.
• Use a soft bristle brush to loosen caked on dirt, oil, etc.
• Use a vacuum cleaner to pick up loose dirt and debris.
Checkand Clean Inlet Screen
Examine the screen on the pump's water inlet. Clean it if the
screen is clogged or replaceit if screen is damaged.
CheckHigh PressureHose
The high pressure hose can develop leaks from wear,
kinking, or abuse. Inspect the hose each time before using it.
Checkfor cuts, leaks, abrasions or bulging of cover, damage
or movement of couplings. If any of these conditions exist,
replacethe hose immediately.
_i, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
• NEVER repairhigh pressure hose.Replace it.
• Replacement hoseratingMUSTexceedmaximumpressure
ratingof unit.
16 www.troybilt.com