Featuresand Controls - Troy-Bilt 020344-2 Manual Del Operario

Featuresand Controls
Read this Operator'sManual and safety rules beforeoperating your pressurewasher.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A - Spray Gun-- Controls the application of water onto
cleaning surface with trigger device. Includes trigger
lock.
B - Nozzle Extensionwith Quick Connect-- Allows you to
switch between four different spray tips.
C - High PressureHose -- Connect one end to water pump
and the other end to spray gun.
D - Oil Fill/Dipstick-- Checkand fill with oil here.
E - Pump (under base)-- Develops high pressure.
F - Automatic Cool DownSystem -- Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
G - Air Filter -- Protects engine by filtering dust and debris
out of intake air.
H - Recoil Starter -- Used for starting the engine manually.
J - Fuel Tank -- Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
K - Warning/OperatingInstructionsTag -- Identifies
hazards and proper procedure to start/stop pressure
washer.
L- CleaningTank-- Use to hold up to one gallon (3.78 I) of
pressure washer safe detergent in tank.
M - AccessoryTray -- Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
N - Spray Tips -- Detergent, 0°, 15° and 40°: for various
high pressure cleaning applications.
Items Not Shown:
Identification Label (near rear of base plate) -- Provides
model and serial number of pressure washer. Pleasehave
these readily availableif calling for assistance.
Engine Controls-- See engine manual for details on engine
controls.
High PressureOutlet-- Connectionfor high pressure hose.
Water Inlet -- Connection for garden hose.
10 www.troybilt.com