Martin Yale 1217A Instrucciones De Operación página 9

REVERSING MOTOR TO CLEAR JAM
There is a secondary switch on the machine that allows the unit to run backwards. This
is accomplished by pressing both switches at the same time. This will usually allow a
jam to be removed by working with the paper at the same time that you reverse the
motor. There is a reference sticker beside the switch to help eliminate confusion.
MANUALLY CLEARING JAM WITH FLATHEAD SCREWDRIVER
For more severe jams, there is a slot on the operators side of the machine where the
rollers can be manually turned with a large flat head screw driver. Do not attempt to
manually rotate the rollers while the machine is turned on.
REMOVING FOLD TABLE LID TO CLEAR JAM
When paper is lodged and cannot be removed by any of the above methods, it may
require removing the lid from the upper folding table. This is done by removing the (2)
thumbknobs that hold the lid in place, and pulling it away from the machine. This will
provide increased access to the rollers, and easier access to the paper. NOTE: When
reinstalling the knobs, do not over tighten.
Parts Schematics and Diagrams Available Separately
Martin Yale Industries, Inc.
251 Wedcor Avenue
Wabash, IN 46992
Info@martinyale com IX