Manual Programming Guide; Programming Procedures - Allegion Schlage Sense Guia Del Usuario

Manual Programming Guide

Programming Procedures

»
Programming mode will automatically time out
after 30 seconds of inactivity.
PROGRAMMING CODE
Write your programming code here for easy access.
Manual programming functions are NOT available after pairing using the mobile app!
You must perform a Factory Default Reset to program your lock manually.
ADDING ACCESS CODES
»
Determine how long you want your access codes to be BEFORE adding any access
codes. If you change the access code length, all existing access codes will be deleted!
Press
DELETING ACCESS CODES
Press
CHANGING THE PROGRAMMING CODE
Press
Programming
Programming
ENABLE/DISABLE BEEPER*
Press
* Beeper will still sound during programming.
DELETE ALL ACCESS CODES
Press
8
Enter
Programming
Code
Programming
indicator light
blinks
Enter
Programming
Code
Programming
indicator light
blinks
Press
Enter
Code
indicator light
blinks
Enter
Programming
Code
Programming
indicator light
blinks
Enter
Programming
Code
Programming
indicator light
blinks
WARNING
Press
Enter New
1
Access Code
(4-8 digits)
Press
Enter
2
Unwanted
Access Code
Enter New
3
Programming
Code
Press
Enable
5
1 blink
+ 1 beep
Disable
2 blinks
+ 2 beeps
Press
Enter
6
Programming
Code
Success!
2 blinks
+ 2 beeps
»
If you make a mistake
during programming,
press the outside
Schlage button to
leave Programming
mode and start over.
Enter Same
New
Access Code
another
(4-8 digits)
access
Success!
2 blinks
+ 2 beeps
Enter Same
Unwanted
Delete
Access Code
another
access
Success!
2 blinks
+ 2 beeps
Enter Same New
Programming
Code
Success!
2 blinks
+ 2 beeps
WARNING:
Removes all access
codes from the
lock. Access codes
cannot be retrieved
after they are
deleted!
Add
code
code