SOLAC SP7080 Instrucciones De Uso página 10

DESCRIPTION
A Concentrator nozzle
B Filter
C Speed selector
D Temperature selector
E Cold shot button
F Diffuser
G Hanging ring
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTRUCTIONS FOR USE
BEFORE USE:
- Some parts of the appliance have been lightly
greased. Consequently, the first time the ap-
pliance is used a light smoke may be detected.
After a short time, this smoke will disappear.
USE:
- Unroll the cable completely before plugging it
in.
- Connect the appliance to the mains.
- Guide the appliance to direct the flow of air in
the desired direction.
- Turn the appliance on, by using one of the
speed selection buttons.
- Select the desired temperature.
IONIC FUNCTION:
- The appliance can generate negative ions.
- Once the appliance is in operation, it
- automatically activates the generation of neg-
ative ions.
- Negative ions are useful for removing the static
electricity and hair frizz.
COOL AIR BLOW:
- This feature provides a flow of cool air to help
to shape the hair.
- Press the cool air blow button (E) to use this
function.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance using position 0 of the
selector C.
- Unplug the appliance from the mains.
ACCESSORIES:
AIR CONCENTRATOR ACCESSORY (A):
- This accessory is used to concentrate the air
flow into one specific area.
- Attach the unit to the product by pressing until
you hear a click.
DIFFUSER ACCESSORY (F):
- This accessory is used to harmonize the air
flow into one specific area.
- Attach the unit to the product by pressing until
you hear a click (Fig.1).
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
CLEANING THE FILTER:
- The air inlet filter should be cleaned periodical-
ly for proper operation of the device.
- For clean the product please fill the instructions
on Figure 2.
- Clean the filter and remove any dirt or hair.
- Put the filter back in its place.