Hoover HOP 455X Instrucciones De Uso página 12

USE OF THE PROGRAMMER
FUNCTION HOW TO ACTIVATE ITHOW TO SWITCH IT OFF
• When knob (1) is turned
OVEN
to the
LIGH
comes on
CLOCK
• Turn the selector knob (1)
to the
• Using
set the time of day (while
setting, the numbers on
the display will flash)
• Turn selector knob 1 to the
ALARM
symbol.
• Set the cooking time using
the
setting, the numbers on
the display will flash)
CHILD
• Turn the selector knob 1
SAFETY
to the
indicator light will flash.
• Press the
at the same time, for three
seconds.
• The setting is confirmed
when the light stops
flashing.
COOKING
• To select a cooking fun-
TIME
ction use (selector knob 2)
• Turn selector knob 1 to the
symbol
• Set the cooking time using
the
setting, the numbers on
(To be used even for
the display will flash)
the pyrolysis cycle)
END OF • Select a cooking func-
COOKING tion (selector knob 2)
• Turn the selector knob to
the
• Set the end of cooking time
using the
(while setting, the numbers
on the display will flash)
(To be used even for
the pyrolysis cycle)
THE PROGRAMMER
Clock display
Programmer function
display
symbol, the light
• Turn the selector knob to
symbol. the position
the and buttons,
• When the set cooking time
is up, the oven will auto-
matically switch itself off. If
you need to stop it before
and buttons (while
then, you must turn the set
time to 0 (selector knob 1
on
and
• Press buttons
symbol. The together for three seconds.
The light flashes.
and buttons
• When the cooking time is
up, the oven will switch it
self off.
If you need to stop it before
then, the oven must be
switched off, or the cooking
and buttons (while
time must be turned to 00:00.
(selector 1 to symbol
and use the
buttons)
• At the pre-set time the oven
automatically switches
itself off. If you need to stop
symbol. it before then, switch the
oven off by turning the
and buttons selector knob 2 to the
symbol.
Safety display
Control buttons
WHAT IT DOES
• Allows you to regulate the
time shown on the oven
clock
• Provides an audible alarm
signal (for a few seconds)
at the end of cooking time.
and then use the
buttons)
and • The oven settings cannot
be altered (even when the
knobs are accidentally
adjusted)
• Allows the end of cooking
time to be stored in the
memory.
• When the cooking time
has been set, turn selector
knob 1 to the
to display the time of day.
, • To display the programmed
and time turn selector knob 1
to the
• Allows the end of cooking
time to be stored in the
memory.
• When the cooking time has
been set, turn selector
knob 1 to the
display the time of day.
• To display the programmed
time turn selector knob 1
to the
WARNING
The first operation to carry out after the oven has been
installed or following the interruption of power supply
(this is recognizable the display pulsating and showing
12:00) is setting the correct time.
A slight delay will occour when setting a programme, while the
oven carries out internal diagnostics.
11 GB
WAT IT IS FOR
• This function is useful for
checking that the oven is
fully operational.
• Using the
set the time of day (while
setting, the numbers on the
display will flash)
NB: Set the clock imme-
diately after installing the
appliance or after an inter-
ruption to the power sup-
ply (this is shown by 12:00
flashing on the display).
• Useful as a reminder
• This function works
independently of the
oven (it can be used
even when the oven is
not working)
• Operates even when the
oven is not on preventing
it from being inadvertently
switched on.
• Is operational when the
oven is on and prevents
any alterations to the
settings (through acciden-
tal turning of the knobs)
NB: the oven can still be
switched off by turning se-
lector knob 2 to position 0.
• When the set cooking time
is up the oven switches
itself off automatically and
for a few seconds an alarm
sounds.
symbol
symbol.
• This function is used typi-
cally used with 'cooking
time' function. For example
if the dish has to be
cooked for 45 minutes and
needs to be ready by
symbol to
12:30, simply select the
required function, set the
cooking time to 45 minutes
and the end of cooking
symbol. time to 12:30.
Cooking will start automa-
tically at 11:45 (12:30
minus 45 mins) and
will continue until the pre-
set end-of-cooking-time,
when the oven will switch
itself off automatically.
and buttons,