Defrosting The Cooling Device; Replacing The Plug Fuse (12/24 V) - Dometic CF Serie Instrucciones De Uso

Operation
6.11

Defrosting the cooling device

Humidity can form frost in the interior of the cooling device or on the evaporator. This
reduces the cooling capacity.
Defrost the device in good time to avoid this.
A
NOTICE! Risk of damage to the device!
Never use hard or sharp tools to remove ice or to free objects frozen
onto the device.
To defrost the cooling device, proceed as follows:
➤ Empty the contents.
➤ If necessary, put them in another cooling device to keep them chilled.
➤ Switch off the device.
➤ Leave the lid open.
➤ Wipe off the condensate.
6.12 Replacing the AC fuse
D
DANGER! Danger of electrocution!
Disconnect the connection cable before you replace the device fuse.
➤ Remove the connection cable.
➤ Pry out the fuse insert (fig. 3 2, page 3) with a screwdriver.
➤ Replace the defective fuse with a new one that has the same rating (T4AL 250 V).
➤ Press back the fuse insert into the housing.
6.13

Replacing the plug fuse (12/24 V)

fig. 7, page 4
➤ Pull the adapter sleeve (4) off of the plug.
➤ Unscrew the screw (5) out of the upper half of the housing (6).
➤ Carefully lift the upper half of the housing off the lower half (1).
➤ Take out the contact pin (3).
16
CoolFreeze
EN