Dvd/Disc Audio Operation; Cd Player User Interface; Controlling Playback; Mp3/Wma Operation - Jensen VM9311TS Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

VM9311TS

DVD/DISC AUDIO OPERATION

Instructions for TFT control and Insert/Eject are the same for
DVD, CD and MP3 operation. Please see the DVD/Disc
Video Operation section for information about these topics.
The VM9311TS will play music or other audio files from the
following disc media:
• CD-DA
• CD-R/RW with MP3 or WMA files
• DVD
• DVD-R/RW with MP3 or WMA files
Upon inserting a disc with the TFT screen open, the disc and
track title (if available), along with the track number and
playing time appear on the screen.

CD Player User Interface

The on-screen indicators and touch key areas for CD
playback are outlined below.
9
3
1
2
T: 02/18
00:00:51
Repeat
Scan
Random
Disc Title
Ultra
Track Name
Useless
10
11
12
13
Source: DVD/CD
EQ: USER
16
17
1.
Current track and total number of tracks on disc
2.
Elapsed playing time
3.
Touch to activate/deactivate Repeat play mode
4.
Touch to activate/deactivate Scan mode
5.
Touch to activate/deactivate Random mode
6.
Current time
7.
Disc Title
8.
Track Title
9.
Touch to return to MAIN MENU
10. >/||: Touch to play/pause disc playback
11.
: Touch to stop disc playback
12. |<<: Touch to move to previous track
13. >>|: Touch to move to next track
14. <<: Touch to rewind current track
15. >>: Touch to fast forward current track
16. Playing Mode
17. User Defined Equalizer Level
18. Loud Setting Indicator

Controlling Playback

Stopping Playback
Press the 6/STOP button (13) on the front panel or the
BAND button (20) on the remote control to stop disc play.
To resume playback, press the ENTER button, or the joystick
(20), on the front panel or the >/|| button on the remote
control (18).
Pausing Playback
Press the ENTER button, or the joystick (20), on the front
panel or the >/|| button on the remote control (18) to suspend
or resume disc play.
5
4
6
Moving Through Tracks
Press the >>| button (19) on the remote control or the >
1 :32
AM
2
button on the joystick (17) to advance to the next track on the
disc.
Press the |<< button (17) on the remote control or the <
7
button on the joystick (16) to move to the previous track.
Repeat Playback
Press the 4/RPT button (11) on front panel or the REPT
8
button (7) on remote control to alter repeat mode according to
the following:
14
15
• DVD: Repeat Title, Repeat Chapter, Repeat Off
• CD-DA: Repeat Single, Repeat Off
Loud: OFF
• CD-R/RW: Repeat Single, Repeat Off
• DVD-R/RW: Repeat Single, Repeat Off
18
Track Scan Select (CD-DA discs only)
During disc play, press the 3/SCN button (10) on the unit or
the SCN button (34) on the remote control to play the first 10
seconds of each track. When a desired track is reached,
press the SCN button again to cancel the function and play
the selected track.
Random Play Select
During disc play, press the 5/RDM button (12) to play the
tracks on the disc in a random, shuffled order. In Random
Play mode, you can Press the |<< or >>| button (17, 19) on
remote control or the < or > button (16, 17) on the joystick to
select a track in random order instead of the normal
progression. Press 5/RDM again to cancel Random Play
mode.
NOTE: CD-R and CD-RW will not play unless the
recording session is finalzed.
Fast Forward
Press the >> button (14) on the remote control or the /\ button
(18) on the joystick to fast forward. Keep pressing and
releasing the button to increase the rate from "2X" to "4X",
"8X", and "20X".
/

MP3/WMA Operation

This player allows you to play back MP3 and WMA files
recorded onto CD-R/RW's and DVD-R/RW's. For CD-RW
discs, please make sure it is formatted using the full method
and not the quick method to prevent illegal disc operation.
Up to 999 songs/files can be burned onto a disc for a MEGA
DVD music mix. Do not exceed this number of songs/files or
disc readability problems may occur.
MP3 Format Compatibility
The file naming formats listed below are compatible with this unit:
• ISO 9660 – file name: 12 characters, file extension: 3
characters
• ISO 9660 – file name: 31 characters, file extension: 3
characters
• Joliet – 64 characters
If the file or folder name does not conform to ISO 9660 file
system standards, it may not be displayed or played back
correctly. Use the following settings when compressing audio
data for your MP3 disc:
• Transfer Bit Rate: 128kbps
• Sampling Frequency: 48kHz
When recording MP3 up to the maximum disc capacity,
disable additional writing. For recording on an empty disc up
to maximum disc capacity, use the "Disc at once" setting.
Playing MP3/WMA Files
After inserting a MP3/WMA disc, files will play in the
sequence of the "Root' directory. Use the numeric keypad
(29) on the remote control to access files directly.
NOTE: When burning MP3 / WMA files onto a DVD
disc, use the 2X or 4X burning option, if available.
This slower burning speed will help eliminate
buffer errors and increase disc reading reliability.
Also, use folders when burning large numbers of
songs / files to a disc for easy music navigation.
Select the "Disc at Once" option and close your
disc.
23

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido