Overview; Before First Use; Commissioning - Venta LW15 COMFORT Plus Manual De Instrucciones

OVERVIEW

Display
1
2 Upper housing
Switching power supply (assembled)
3
4 Transport protection

BEFORE FIRST USE

∙ Unpack and set up device. Remove the 50 ml bottle of hygiene additive 8 from
carton.
∙ Remove upper housing 2. Remove transport protection 4 from upper
housing 2.
∙ Remove disk stack 5 from lower housing 7 and transport protection 6.

COMMISSIONING

A C
A Fill lower housing 7 with tap water up to maximum WATERLINE marking
and add 50 ml hygiene additive 8 (complete content of bottle).
The device may never
be filled with the upper
housing in place!
Insert disk stack 5 in lower housing 7 and place upper housing 2 on lower
B
housing 7.
C Connect mains plug of switching power supply 3 to the mains and switch
on device by briefly touching the power button in the display 1.
Only once the device is connected to the mains will the
i
power button  glow to switch the device on and off.
Image can be seen on fold-out page
5
6
7
8
optimally humidified and cleaned.
Disk stack
Transport protection
Lower housing
Bottle of hygiene additive 50 ml
Image can be seen on fold-out page
Adding the hygiene additive is
i
very important so that the air is
Venta Comfort EN 17
Plus