Publicidad
Idiomas disponibles
Idiomas disponibles
installation
Do not install the appliance:
outdoors,
in an environment
with dripping
water,
in rooms which are at risk of
frost.
The appliance
is very heavy
for
empty weight see the following
table:
Refrigerator
24"
310 tbs / 140 kg
Refrigerator
30"
350 tbs / 158 kg
Installation
room
The appliance
should be installed in
a dry, welt ventilated
room.
The ambient temperature
should not
drop below 55 °F (13 °C) or rise
above 110 °F (43 °C), otherwise
malfunctions
may occur.
The installation
location should not
be exposed to direct sunlight and
not placed near a heat source, such
as an oven, radiator, etc.
If installation
next to a heat source is
unavoidable,
use a suitable
insulating
plate or observe the
following
minimum
distances from
the heat source:
1.2" (3 cm) from an electric
cooker,
12" (30 cm) from an oil or
solid fuel cooker.
Furniture/fixtures
The new appliance
wilt be mounted
securely to adjacent and overhead
furniture/fixtures.
For this reason it is essential that all
attachable
furniture/fixtures
are
connected
securely to the base or
the walt by suitable means.
Base
To ensure that the appliance
is
installed securely and functions
properly, the base must be flat and
level.
The base must be made of a hard,
rigid material.
The installation
area must be the
same height as the rest of the room.
On account
of the heaw weight of
a fully loaded appliance,
a toad bearing base is required.
For fully loaded weight see the
following
table:
Refrigerator
24" 890 tbs / 400 kg
Refrigerator
30" 1110 tbs / 500
kg
If in doubt, contact
an architect
or
a building expert.
Installing
and
connecting
the
appliance
Connection
to the power
supply
Avoid
Electrical
Shock
Hazard
Plug into a grounded
3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
Improper connection
of the
equipment
grounding
conductor
may result in electric shock. Have
the appliance
checked
by a
qualified electrician
or service
technician
if you are in doubt as
to whether the appliance
has
been properly grounded.
The appliance
comes with an UL
listed, 3 wire power supply cord.
The appliance
requires a 3 wire
receptacle.
The receptacle
must be installed by
a licensed electrician
only.
Installation
cavity
It is important
to observe the
specified
dimensions
of the
installation
cavity for a trouble free
installation
of the appliance
and for
the subsequent
general view of the
furniture front.
In particular ensure that the cavity is
square. Squareness
can be checked
by suitable means, e.g. spirit level,
diagonal measurements,
etc.
Have the appliance
installed by an
electrician
according
to the
enclosed
installation
instructions.
After installing the appliance,
wait at
least before switching
on the
appliance.
During transit the oil in
the refrigeration
system may have
moved.
Before switching
on the appliance
for the first time, clean the inside of
the appliance.
7
Publicidad
Capítulos
