LEVELING THE REFRIGERATOR
Now that the doors are back on the refrigerator, you want to make sure the refrigerator
is level so that you can
make final adjustments.
If the refrigerator
is not level, it will not be possible to get the doors perfectly even.
_The
front of the refrigerator
is also adjustable.
Before leveling the refrigerator,
remove the front leg cover
Open both the freezer and fridge doors, and then take off the front leg cover by turning the three
screws counter-clockwise.
When the Freezer part is lower than the Fridge part.
Insert a flat-blade
screwdriver
into a slot on the Freezer Leg, then turn it clockwise.
When the Fridge part is lower than the Freezer part.
Insert a flat-blade
screwdriver
into a slot on the Fridge Leg, then turn it clockwise.
Screw Driver
Freezer Leg
Fridge Leg
Screw Driver
_
Refer to the next section for the best way to make very minor adjustments
to the doors.
setti-_g up 17