Disassemble The Freezer Drawer; Leveling The Refrigerator - Samsung RF4289HA Manual Del Usario

2. Take off the cover (
w/harness with a fl at-
blade screwdriver (-).
3. Press the
locking tab and
separate the Wire
Connector.
When reassembling it, be sure to connect
the wire harness. If it is not connected, the
CAUTION
Flex Room does not work.
4. Remove 2 hex head
bolts from the sides
with a socket wrench
(10mm).
5. Lift up the Flex door from
the rails.
ASSEMBLE THE FLEX DOOR
To reattach the fl ex door after you have moved the
fridge to its fi nal location, assemble parts in reverse
order.
Be sure to connect the Flex Door Wire
Connector. If it is not connected, the Flex
CAUTION
Room does not work.
DISASSEMBLE THE FREEZER
DRAWER
1. Take out the upper
drawer by lifting it up.
DA68-02520A(1.0).indb 09 DA68-02520A(1.0).indb 09
2 )
2
2. Remove the tilting
pocket ( 1 ) by
pulling both support
guards ( 2 ) aside.
And take out both
support guards by
pulling them aside.
3. Take out the lower
basket ( 3 ) by lifting the
basket up from the rail
system.
4. Remove 4 hex head bolts
from both sides with a
socket wrench (10mm).
5. Lift up the freezer door
from the rails.
Putting too much food into the freezer
drawers can prevent the freezer from
CAUTION
closing completely and can cause frost
build-up.
ASSEMBLE THE FREEZER
DRAWER
To reattach the drawer after you have moved the
fridge to its fi nal location, assemble parts in reverse
order.

LEVELING THE REFRIGERATOR

Make sure the refrigerator is level so that you can
make fi nal adjustments.
Use a level to test if the refi gerator is level both side
to side and back to front.
1
2
3
setting up _09
2012.5.30 10:40:6 AM 2012.5.30 10:40:6 AM