Leveling The Refrigerator - Samsung RS26DDA Serie Manual De Instrucciones

Ocultar thumbs Ver también para RS26DDA Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

setting up your side-by-side refrigerator

LEVELING THE REFRIGERATOR

Now that the doors are back on the refrigerator, you want to make sure the refrigerator is level so that you can
make nal adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.
The front of the refrigerator is also adjustable.
Before leveling the refrigerator, remove the front leg cover
Open both the freezer and fridge doors, and then take o the front leg cover by turning the three
screws counter-clockwise.
When the Freezer part is lower than the Fridge part.
Insert a at-blade screwdriver into a slot on the Freezer Leg, then turn it clockwise.
When the Fridge part is lower than the Freezer part.
Insert a at-blade screwdriver into a slot on the Fridge Leg, then turn it clockwise.
Screw Driver
Refer to the next section for the best way to make very minor adjustments to the doors.
16_setting up
Fridge Leg
Freezer Leg
Screw Driver

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido