Using The Bluetooth Cellular Phone - JVC KW-ADV790 Manual De Instrucciones

Using the Bluetooth cellular phone

Sound mode
(☞ page 45)
The Bluetooth icon
lights up when
the adapter is
connected.
: Buttons on the touch panel. In the
explanation, they are indicated inside
[ ].
1
* When a cellular phone with audio function is connected, appears.
2
* This adjustment does not affect the volume level of the other sources.
~
Press [SOURCE], then press [Bluetooth PHONE].
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ
Press [AV MENU].
• You can also use AV MENU on the monitor panel.
!
Press [Bluetooth].
⁄
Establish the connection with a device, then make a call (or settings using <Bluetooth>
menu).
☞ page 55
When a call comes in...
The source is changed to "Bluetooth PHONE"
automatically.
Name and phone number (if acquired)
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
(☞ page 55)
☞ page 31
Adjust the volume of the incoming calls.*
[AV MENU] Hold: Activates <Voice Dialing> function
5 ∞
[
29
2
] Select the registered device
("New Device" appears when a new device can be registered.)
(☞ page 9)
When <Auto Answer> is deactivated...
To answer the incoming call
• Press any button on the monitor panel (except
/ATT or +/–).
• Press the message displayed on the touch panel.
To end the call
• Hold any button on the monitor panel (except
/ATT or +/–).
• Hold the message displayed on the touch panel.
• You can adjust the microphone volume. (☞ page 55)
1
*
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
EXTERNAL DEVICES