ECOVACS DEEBOT OZMOT8+ Manual De Instrucciones página 33

No. Malfunction
DEEBOT does not clean the
11
whole area.
DEEBOT Side Brushes drop
12
out of place during use.
DEEBOT does not start auto-
13 emptying after returning to the
Auto-Empty Station.
Possible Causes
The cleaning area is not tidy.
The Side Brushes are not correctly installed.
The Dust Container Lid is not closed.
The Dust Bag is not installed to the Auto-
Empty Station.
Manually move DEEBOT to the Auto-Empty
Station will not trigger Auto-Emptying.
DEEBOT returns to the Auto-Emptying
Station running Video Manager in the App.
Do Not Disturb mode is enabled in ECOVACS
HOME App.
The Dust Bag is full.
If the possible causes are excluded, it might
be a component malfunction.
Solutions
Remove small objects from the floor and tidy up the
cleaning area before DEEBOT starts cleaning.
Make sure the Side Brushes click into place when
installing.
Close the Dust Container Lid.
Install the Dust Bag and close the Dust Container Lid.
In order to make sure DEEBOT starts auto-emptying
successfully, avoid picking up and moving the Auto-
Empty Station during the cleaning.
This is normal.
This is normal. Disable Do Not Disturb mode in the App,
or start auto-emptying manually.
Replace the Dust Bag and close the Dust Container Lid.
Please contact customer service.
33
EN