Specific Safety Rules - Makita BHP343 Manual De Instrucciones

ENGLISH
1. Red part
2. Button
3. Battery cartridge
4. Switch trigger
SPECIFICATIONS
Model
Capacities
No load speed
-1
(min )
Blows per minute
-1
(min )
Overall length
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
............. Read instruction manual.
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to
hammer drill safety rules. If you use this power tool
unsafely or incorrectly, you can suffer serious
personal injury.
1. Wear ear protectors with impact drills. Exposure to
noise can cause hearing loss.
2. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
3. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high
locations.
4. Hold the tool firmly with both hands.
5. Keep hands away from rotating parts.
4
Explanation of general view
5. Reversing switch lever
6. Speed change lever
7. Adjusting ring
8. Action mode changing ring
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
Low (1)
High (2)
Low (1)
1.4 Kg (BL1415)/1.6 Kg (BL1430) 1.7 Kg (BL1815)/1.9 Kg (BL1830)
END004-2
ENE039-1
GEB011-2
9.
10. Arrow
11. Sleeve
12. Blow-out bulb
BHP343
10 mm
10 mm
25 mm
5.1 mm x 63 mm
6 mm
0 - 1,300
0 - 400
0 - 19,500
0 - 6,000
211 mm
D.C. 14.4 V
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Do not touch the bit or the workpiece immediately
after operation; they may be extremely hot and
could burn your skin.
8. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter,
stop operating immediately. It may result in a risk
of overheating, possible burns and even an
explosion.
Graduation
BHP453
13 mm
13 mm
36 mm
6 mm x 75 mm
232 mm
D.C. 18 V
ENC007-2