Zwilling ENFINIGY 53000 Manual De Instrucciones página 27

GB
Fault
Problem
The appliance switches off,
display shows E2
The appliance switches off,
display shows E3 or E4
The mixed product contains
many ingredient pieces.
The appliance switches off
immediately.
www.zwilling.com
Possible cause
Very big amounts of ingredi-
ents of very hard consistency
block the blades.
Motor is overheated. Venti-
lation openings on the lower
side are blocked.
Motor is overheated. The
blender has been strained to
long and to heavily.
The power button was not
pressed and held for long
enough in the multi-function
program.
The mixing speed is too low or
the mixing duration too short if
you have selected the mixing
speed yourself.
The ingredients are not suitable
for the selected automatic
program to be used.
The power button was not
pressed and held in the mul-
ti-function program.
Remedy
Remove the blender bowl, loos-
en contents, possibly reduce
their amount (Caution: Risk of
injury with the blades). Reinstall
blender bowl and resume
blending.
Unblock ventilation openings,
let appliance cool down for 1
hour and resume blending.
If necessary reduce the amount
of contents, let appliance cool
down for 1 hour and resume
blending.
Press and hold the power button
until the desired consistency is
reached.
If you have selected the mixing
speed yourself, turn the selec-
tor switch further to the right to
increase the mixing speed, or ex-
tend the mixing process until the
desired consistency is reached.
Finish mixing the mixed product
with the multi-function program
until the desired consistency is
achieved.
Press and hold the power button.
Fault
27