Box Ribbon
The following hardcoated box ribbons are available as
accessories to hold french fry boxes. The five and eight pleat
ribbons can be installed on the right or left side of the fry pan.
Four Pleat Fry Box Ribbon (GRFHS-16, -21S, and -26)
Five Pleat French Fry Box Ribbon (GRFHS-22 and -26)
Five Pleat Fry Box Ribbon (GRFHS-21)
Eight Pleat Fry Box Ribbon (GRFHS-PTT21 and -PT26)
Four Pleat Fry Box Ribbon
Bag Ribbon
The following hardcoated bag ribbons are available as
accessories to hold french fry bags.
Five Pleat Fry Bag Ribbon (GRFHS-16, -21S, and -26)
Seven Pleat Fry Bag Ribbon (GRFHS-21)
Eight Pleat French Fry Bag Ribbon (all models)
Ten Pleat Fry Bag Ribbon (GRFHS-PTT21 and -PT26)
Seven Pleat Fry Bag Ribbon
Box/Bag Combo Ribbons
The following hardcoated box/bag combo ribbons are available
as accessories.
Six Pleat Fry Box/Bag Combo Ribbon (GRFHS-21)
A six pleat fry bag/box combo ribbon can be added to the fry
bin on either the right or left side. Each combo tray can hold up
to three fry bags and three fry boxes.
Nine Pleat Fry Box/Bag Combo Ribbon
(GRFHS-PTT21 and -PT26)
A nine pleated hardcoated fry bag/box combo ribbon can be
added to either the front or rear of the fry bin. Each combo tray
can hold up to four fry boxes and five fry bags.
Nine Pleat Combo Ribbon
Form No. GRFHSCEM-1016
OPTIONS AND ACCESSORIES
Side-by-Side Bag
and Tong Holder
A side-by-side bag and tong
holder is available as an
accessory for GRFHS-21 and
GRFHS-21S models only. The
bag and tong holder hangs on
the pan stop.
Side-by-Side Bag
Holder
A side-by-side bag holder is
available as an accessory for
GRFHS-21 models only. The
bag holder hangs on the pan
stop.
Piggy-Back Bag Holder
A piggy back bag holder is available
as an accessory for GRFHS-21,
GRFHS-21S, and GRFHS-PTT21
models. The piggy-back bag holder
hangs on the fry bin and provides
two spots to store fry bags.
Scoop Holder
A scoop holder is available as
an accessory for GRFHS-21S,
GRFHS-PT26 and GRFHS-PTT21
models. The scoop holder hangs on
the pan stop.
Right- or Left-Hand Cutout for Fry Basket
An optional right- or left-hand cutout for easier access to a
fry station with a fryer basket is available for GRFHS-16,
GRFHS-21, and GRFHS-26 models.
GRFHS-PT26 w/ 152 mm (6") Base
The GRFHS-PT26 is available with a 152 mm (6") deep base
instead of the standard 102 mm (4") base.
Dividers
Dividers are available as accessories. Order using the following
Hatco Order Number that corresponds to the appropriate model.
Model
GRFHS-16,
GRFHS-26,
GRFHS-PT16................................................. FHSDIV1
GRFHS-21...................................................... FHSDIV2
GRFHS-PT26 (standard),
GRFHS-PTT21............................................... FHSDIV3
GRFHS-22...................................................... FHSDIV4
GRFHS-PT26 (optional 152 mm [6"] Base).... FHSDIV5
9
Order Number