Specific Safety Rules - Ryobi RY13050 Manual Del Operador

 Check the work area before each use. Remove all objects
such as rocks, broken glass, nails, wire, or string which can
be thrown or become entangled in the edger blade.
 Be sure all guards are properly and securely attached.
 Replace dull or worn blade; do not attempt to sharpen.
 Use this edger for edging along sidewalks, driveways,
flower beds, and similar areas. Do not use for any other
purpose.
 Be thoroughly familiar with the controls. Know how to
stop the unit and disengage the controls quickly.
 Do not use the edger on or near graveled surfaces.
 If the edger strikes any type of foreign object:
a) Stop the edger and remove the spark plug wire or
disconnect from the power supply.
b) Inspect for damage to the edger.
c) Correct damage before using the edger. Failure to do
so can cause serious injury.
 Always stop the engine and remove the spark plug wire
before attempting to remove any obstruction caught or
jammed in the blade, or making any adjustments.
 Do not attempt to remove cut material nor hold material
to be cut when the engine is running or when the cutting
blade is moving.

SPECIFIC SAFETY RULES

4 — English
 Keep hands and feet away from the cutting area.
 Always keep your hands on the upper handle when the
blade is rotating.
 A coasting blade can cause injury while it continues to
spin after the engine is stopped or throttle trigger released.
Maintain proper control until the blade has completely
stopped rotating.
 Check blade nut for tightness before operating.
 Improper assembly can create a dangerous situation.
 Never stand or have any part of your body in line with the
path of the edger blade.
 To prevent electrical shock or serious personal injury, do
not use this product with any electric power head.
 Save these instructions. Refer to them frequently and
use them to instruct others who may use this product. If
you loan someone this product, loan them these instruc-
tions.