Montarbo MCR Serie Manual De Instrucciones página 49

MC-R8FX / MC-R12FX / MC-R16FX / MC-R12FXP / MC-R16FXP - Connectors
Signal connectors: for all models
A
BALANCED XLR MALE CONNECTOR for:
MICROPHONE INPUTS in mono / stereo channels (nr. 11, 24)
B
MONO JACK CONNECTOR for:
LINE INPUTS (unbalanced) (nr. 12, 25, 26)
Mono channels DIRECT OUT (nr. 14)
AUX 1, 2, 3, 4 outputs (nr. 36, 39)
STEREO RETURN (nr. 40)
CONTROL ROOM outputs (nr. 44)
FOOTSWITCH (nr. 35)
Master L/R INSERT (nr. 54) when used as outputs
C
STEREO JACK CONNECTOR for:
LINE INPUTS (balanced) (nr. 12, 25, 26)
☛ ALWAYS USE HEAVY GAUGE,
GOOD QUALITY SHIELDED CABLES !
MC-R16FXP / MC-R12FXP - Connectors
Power amplifier connectors: for powered models only
H
MONO JACK CONNECTOR for:
SPEAKER OUTPUTS (nr. 57)
1
GND = Ground
2
+ = Hot
☛ ALWAYS USE HEAVY GAUGE (at least 2 x 1,5 mm
GOOD QUALITY, UNSHIELDED CABLE (SPEAKER
CABLE)
1 GND Ground
2 + Hot
3 - Cold
(IEC 268 standard)
1 2
GND
+
1
GND
D
BALANCED XLR FEMALE CONNECTOR for:
LEFT OUT / RIGHT OUT master outputs (nr. 53)
E
STEREO JACK CONNECTOR for:
mono channels INSERT (nr. 13)
Master L/R INSERT (nr. 54) when used as inserts
F
PIN-RCA CONNECTOR for:
TAPE IN L/R - TAPE OUT L/R (nr. 46)
G
STEREO JACK CONNECTOR for:
PHONES output (nr. 42)
I
Speakon® NL4-FC CONNECTOR for:
2 SPEAKER OUTPUTS (nr. 57)
+
)
2
1 GND Ground
2 + Hot
3 - Cold
(IEC 268 standard)
1 +
= hot
1 -
= Ground
2 +
= n.c.
2 -
= n.c.
APPENDIX
49