Programmed Play; Cleaning And Maintenance - AEG MC 4455 Instrucciones De Servicio

Only for CDs in MP3 format
Press once = the current track is repeated continu-
ously (
Press twice = the selected folder of the MP3 CD is
repeated continuously FOLDER
appears in the display). You can select
the individual folders with the buttons
FOLDER+/PRESET+ and FOLDER-/
PRESET- (6/12 on the remote control).
Press three times = the whole CD is played continuously
( ALL appears in the display).
Press four times = the display contains the word RAN-
DOM, MP3 and the track number
that is to be played first. All tracks are
played back in random order.
Press five times = (The display shows INTRO) Each title
of the CD is played for 10 seconds.
Press six times = the function is deactivated and the CD
is played in the normal mode.
FOLDER+/PRESET+ or FOLDER-/PRESET- (6/12)
Press these buttons during playback to select the next folder
up or down. If this button is pressed in stop mode the display
also appears briefly. Then start playback with the
(6/14).
+10 (2 on the remote control)
Press this button to jump forwards 10 tracks at a time (provided
that there are more than 10 tracks stored on the CD).

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the button (9/14).
2. Press the PROGRAM/MEMORY button (5 on the remote
control). The display shows 00-P-01. The first two digits
indicate the currently selected title and the last two digits
the current storage location. Use the / buttons (8/5
and 3/13) to select the desired track and then press the
PROGRAM/MEMORY button again. The display changes
to memory slot 00-P-02.
NOTE:
• For CDs in the MP3 format, press the buttons
FOLDER+/PRESET+ and FOLDER-/PRESET- (6/12
on the remote control) to change the folder.
• In the case of CDs in MP3 format that contain fold-
ers, when the device changes to a different folder
001 appears for the first track of the new folder.
• Up to 20 titles can be programmed. The same title
can appear more than once in the list.
3. Select the next track with the / buttons and press the
PROGRAM/MEMORY button again. Repeat the proce-
dure until all the desired tracks are selected.
appears in the display).
button
4. Press the button (6/14). The playback starts. The
selected track numbers are shown in the display in the
correct order and the symbol or MP3 and PROG
light up.
5. Press once the button to stop the playback while retain-
ing the program.
6. When you press the button (9/11) once, playback is
stopped and the current program is erased. The PROG
control lamp goes out.
The device stops automatically once the entire sequence of
programmed tracks is completed. The abbreviation PROG
goes off and the programmed order of tracks is deleted from
the memory.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing
CDs/MP3". Tracks can be programmed as described under
"Playing Back Programmed Tracks".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
CD jumps during Check the disc for
playback. fingerprints, dirt or
scratches.
English
33
Solution
Ensure that the
disc is inserted with
the label facing
upwards.
Check the disc for
fingerprints, dirt or
scratches.