Programmed Play - AEG SR 4339 Instrucciones De Servicio

English
38
NOTE:
In the case of CDs in MP3 format that contain folders, when
the device changes to a different folder 001 appears for the
first track of the new folder.
STOP (11)
The CD stops.
MODE (16)
In stop mode for programming any order of tracks (see the
section on "Programmed Play").
When an audio CD, or a CD in MP3 format or file is playing.
Press once = (the emits a fixed light) the current
track is repeated continuously.
Press twice = (the ALL emits a fixed light) the
whole CD is played continuously.
Press three times = the display contains the word RAND
and the track number that is to be
played first. All tracks are played back in
random order.
Press four times = (INTRO appears in the display) Each
track on the CD is played for 10 sec-
onds.
Press five times = all functions are cancelled. The normal
play mode is resumed.
Only for CDs in MP3 format or files which are playing:
Press once = the current track is repeated continu-
ously ( appears in the display).
Press twice = the selected folder of the MP3 CD is
repeated continuously (
appears in the display). Use the ALBUM
button (12) to select individual folders.
Press three times = the whole CD is played continuously
( ALL appears in the display).
Press four times = the display contains the word RAND,
MP3 and the track number that is to be
played first. All tracks are played back in
random order.
Press five times = (INTRO appears in the display) Each
track on the CD is played for 10 sec-
onds.
Press six times = the function is deactivated and the CD
is played in the normal mode.
INFO (15)
If ID-3 Tag information has been stored this appears in the
display in the form of an LED ticker display. Press the button
once more in order to switch the function off again.
All manuals and user guides at all-guides.com
ALBUM (12)
Press this button during playback to change to a higher
folder. The display, e.g. FOLDER F02, flashes briefly. Then the
CD begins to play back automatically. If the button is pressed
in stop mode the display also flashes. Then start playback
with thePLAY/PAUSE/USB button.

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the STOP key (11).
2. Press the MODE key (16). The number "P01" (storage
3. Select the next track with the SKIP+/SKIP- key and press
4. Press the PLAY/PAUSE/USB key (14). The playback starts.
FOLDER
5. Press once the STOP key to stop the playback while
6. To play the programme back again, press the PLAY/
7. To delete the program, press the STOP key twice. The
The device stops automatically once the entire sequence of
programmed tracks is completed. The abbreviation MEMO-
RY goes off and the programmed order of tracks is deleted
from the memory.
It is also possible to combine the programmed tracks with the
REPEAT function. After you have programmed and started
the device, please press the MODE button (16) up to three
times and then you can use the functions as described under
MODE".
location) and the symbol MEMORY flash in the display.
Use the SKIP+/SKIP- buttons (10/17) to select the desired
track and then press the MODE button again. The display
changes to memory slot P02.
NOTE:
• In the case of CDs in MP3 format, press the ALBUM
button (12) in order to change the folder.
• In the case of CDs in MP3 format that contain fold-
ers, when the device changes to a different folder
001 appears for the first track of the new folder.
the MODE key again. Repeat the procedure until all the
desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached, "FULL" flashes in the
display.
The first track number selected is shown in the display
together with the playing time that has elapsed and the
word MEMORY.
retaining the program.
PAUSE/USB button.
MEMORY control lamp goes out.