Programmed Play - AEG MC 4411 Manual De Instrucciones

PRE-DN (4 on the remote control)
For a CD in MP3 format:
Press this button during playback to change to a folder further
down. The display, e.g. 01, fl ashes briefl y. Then the MP3 CD
begins to play back automatically.
In radio mode:
To tune the desired radio station.
PRE-UP (4 on the remote control)
For a CD in MP3 format:
Press this button during playback to change to a higher folder.
See the above paragraph for the following step.
In radio mode:
To tune the desired radio station.
SLEEP (14 on the remote control)
With the device switched on this sets the period in 10-minute
steps from 90 to 10 minutes after which the device switches to
standby. Press the button repeatedly until the required duration
is shown in the display. With this function activated the word
SLEEP appears in the display. The device switches off auto-
matically after the set time.
In order to call up the remaining time press the SLEEP button.
This time can also be subsequently shortened or switched off
again (00 Min).
TIMER (15 on the remote control)
You can set the device so that it switches on and off again at a
certain time.
1. Keep the TIMER button pressed down until „
in the display. The hours fi gure begins to fl ash.
2. Use the SKIP-UP I /SKIP-DN I
select the switch-on time (hours).
3. Press the TIMER button and use the SKIP-UP
SKIP-DN I buttons (8/3) to select the switch-on time
(minutes).
4. When the TIMER button is pressed the word „
appears in the display. The hours fi gure begins to fl ash.
5. When setting the switch-off time, please proceed in the
same way as described above.
6. Press the TIMER button and use the SKIP-UP
DN I button (8/3) to select in which mode the radio
should switch on (TUNER or CD).
7. Press the TIMER button and use the SKIP-UP
DN I buttons (8/3) to select the switch-on volume VOL.
8. Press the TIMER button again. The settings are shown in
the display briefl y one after the other and then the device
switches back to the normal display. „ " appears in the
display and the timer is activated.
In order to deactivate the timer, briefl y press the TIMER button.
The word „ " disappears from the display.
05-MC 4411 AEG 53
CLOCK/MEMORY (10/6)
This is used for setting the time, storing stations and program-
ming playback.
Keep this button pressed down fur approx. 3 seconds to call up
the time on the display. Press this button once more to return to
the radio frequency or CD/MP3 track display.
This can be used to program any desired sequence of tracks.
1. Press the STOP key (17/2).
2. Press the CLOCK/MEMORY key (10/6). „00 P-01" (memory
location) appears in the display (13) together with the word
MEMORY. In MP3 format the number of the fi le (00) fl ashes,
while the track number (000), the word MEMORY and the
memory storage number P-01 are shown. Use the
SKIP-UP
desired track and then press the CLOCK/MEMORY button
(10/6) again. The display changes to memory slot P-02.
3. Select the next track with the SKIP-UP
I
peat the procedure until all the desired tracks are selected.
In MP3 format fi rst select the folder. Press the CLOCK/
MEMORY button and then select the desired track.
4. Press the PLAY/PAUSE key (14/1). The playback starts.
The fi rst track number selected appears in the display. The
words „Cd", „ESP" and „MEMORY" appear in the display.
Press this button to pause briefl y the playback.
5. Press once the STOP key (17/2) to stop the playback while
retaining the program. The MEMORY control lamp goes out.
6. To resume the playback of the program press fi rst the
CLOCK/MEMORY key once and then the PLAY/PAUSE key.
7. To delete the program (in stop mode) fi rst press the CLOCK/
MEMORY button and then the STOP button.
ON" appears
The device stops automatically once the entire sequence of pro-
grammed tracks is completed. The MEMORY control lamp goes
buttons (8/3) to
out. The programmed order of tracks remains in the memory
until you change to a different mode, remove the CD from the
I /
CD compartment or switch off the device.
It is also possible to combine the programmed tracks with the
REPEAT function. After you have programmed and started
OFF"
the device, please press the REPEAT button (5) up to three
times and then you can use the functions as described under
„REPEAT".
I /SKIP-
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in
I /SKIP-
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and folders appears in the display). If you would like to play one
of these CDs, proceed as described under „Playing CDs/MP3".
Tracks can be programmed as described under „Playing Back
Programmed Tracks".

Programmed Play

I /SKIP-DN I buttons (8/3) to select the
key and press the CLOCK/MEMORY key again. Re-
I /SKIP-DN
53
05.02.2007, 11:09:41 Uhr